CO2 La technologie de découpe laser présente les avantages suivants:

1. Premier, la précision est élevée: la précision de positionnement est 0.05mm, et la précision de positionnement répétition est 0.02mm.
2. La fente est étroite: le faisceau laser est focalisé en une petite tache, de sorte que la mise au point atteint une densité de puissance très élevée, the material is heated to a degree of vaporization, and evaporation forms a hole. As the beam moves relatively linearly with the material, the holes are continuously formed into slits of narrow width. The width of the slit is generally 0.10-0.20 ram.
3. The cutting surface is smooth: the cutting surface is free of burrs, and the surface roughness of the cutting surface is generally controlled within Ral 2.5A.
4. Speed is fast: the cutting speed can reach lOm/min, and the maximum positioning speed can reach 70m/m/n, which is much faster than the wire cutting speed.
5. The cutting quality is good: no contact cutting, the cutting edge is little affected by heat, and there is basically no thermal deformation of the workpiece, en évitant complètement l'effondrement formée lorsque le matériau est perforé et cisaillé, and the slit generally does not require secondary processing.
6. The workpiece is not damaged: the laser cutting head does not contact the surface of the material to ensure that the workpiece is not scratched.
7. It is not affected by the hardness of the material to be cut: the laser can process steel plates, acier inoxydable, aluminum alloy plates, hard alloys, etc., and no deformation can be performed regardless of the hardness.
8. Non affecté par la forme de la pièce: traitement au laser est flexible, peut traiter tous les graphiques, peut couper des tuyaux et des autres profils.
9. Most non-metal cutting can be done, tel que du plastique, bois, PVC, cuir, textiles and plexiglass.
10. Enregistrement des investissements du moule: laser processing does not require mold, pas de consommation de moule, no need to repair the mold, saving time to replace the mold, thereby saving processing costs, reducing production costs, particulièrement adapté pour le traitement des produits de grande taille.
11. Saving materials: Using computer programming, it is possible to carry out the whole board material cutting of products of different shapes to maximize the utilization of materials.
12. Shortened the manufacturing period of new products: new product trial production, small quantity, uncertain structure, change at any time ‘, can not produce mold at all, laser cutting machine greatly shortened the new product manufacturing cycle, reducing mold investments.